-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Embedded Design: Materials Matter
February 27, 2024 | John Andresakis, Quantic Ohmega-TicerEstimated reading time: 1 minute
The rapid advance of mobile technologies has sparked an insatiable demand for radio spectrum bandwidth. The rush to capitalize on wider bandwidths, higher data rates, and lower latency offered by frequency bands like 5G and millimeter wave is evident across industries. Cellular 5G and 6G networks, low-Earth orbit (LEO) and mid-Earth orbit (MEO) satellites, interconnected devices (IoT), autonomous vehicles, and even defense and environmental monitoring systems are driving this paradigm shift. To manage the influx of signals from these diverse applications, antennas, and sensors are undergoing a critical evolution, becoming increasingly sophisticated and miniaturized.
To ensure high data-rate connectivity in this complex landscape, broadband high-gain antennas are experiencing a significant transformation. Traditional dish and horn antennas give way to flat-panel active electronically steered arrays (AESA) for beam-forming and massive MIMO designs. These AESA arrays, capable of shaping azimuth, elevation, and antenna patterns on demand, are vital for directing beams toward specific devices and maximizing signal efficiency. To accommodate this shift, the RF industry has rapidly developed new integrated circuits, materials, processes, and equipment to build reliable and accurate devices for these mission-critical sensor applications.
Much of the engineering expertise behind these modern AESA systems draws inspiration from phased array antennas and Ka/Ku-band radar technologies typically used in defense applications. These robust systems have paved the way for AESA products that can dynamically control beam direction and target specific communication devices. However, as these technologies migrate from the defense and space sectors to commercial markets, challenges arise for designers who may not have extensive experience with AESA systems. One particular concern involves managing the limited surface area on PCBs while adhering to tighter routing requirements and accommodating a higher layer count.
To read this entire article, which appeared in the February 2024 issue of Design007 Magazine, click here.
Suggested Items
Curtiss-Wright Awarded Contracts Valued in Excess of $130M to Support Critical U.S. Naval Defense Platforms
05/16/2024 | BUSINESS WIRECurtiss-Wright Corporation announced it has been awarded contracts valued in excess of $130 million to provide propulsion valves, pumps and advanced instrumentation and control systems for the U.S. Navy’s Virginia-class nuclear powered attack submarine, Columbia-class submarine and Ford-class aircraft carrier programs.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Viscom’s Approach to Inline X-Ray
05/14/2024 | Barry Matties, I-Connect007In this interview, Viscom President Ed Moll and CEO Jesper Lykke discuss the importance of inline X-rays for real-time data and board inspection. They also discuss AI integration, customer inquiries, and ROI considerations. Also, as Ed moves into semi-retirement, he reflects on his long career, recent developments, and the evolving X-ray industry. He shares his insights on career opportunities for emerging engineers in the industry.
SAIC Awarded $232 Million U.S. Army Contract for Systems Engineering and IT Modernization Services
05/13/2024 | SAICScience Applications International Corp. has been awarded a $232 million contract to develop signals intelligence and electronic warfare systems for the U.S. Army. SAIC was awarded this contract under the Department of Defense Information Analysis Center’s (DoD IAC) multiple-award contract (MAC) vehicle.
EMA Webinar: Next Generation MCAD/ECAD for SOLIDWORKS
05/09/2024 | EMA Design AutomationLearn how the MCAD and ECAD experts at Hawk Ridge and EMA can help you solve your MCAD/ECAD integration challenges with this unique collaboration environment.